Welcome

WiFi Video Transport Module Serial Port AR9331 Openwrt Robot-LinkV4.0 Module for Arduino Robot Tank Car

Item ID: RL4.0

Be the first to review this product

Availability: In stock

$38.95

Availability: In stock

$38.95

More Views

* Required Fields

Details

WIFI Video Transport Module Serial Port AR9331 Openwrt Robot-LinkV4.0 Module for Arduino Robot Tank Car

Robot-Link V4.0 wifi video transport module


Robot-LinkV4.0 WIFI Video Transport Module Description:
- Adopt chip AR9331
- Preset studio open wrt firmware
- Meet standard 802.11 b/g/n protocol, adopt DSSS,OFDM,BPSK,QPSK,CCK and QAM
- The max. speed is up to 150Mbps

Robot-LinkV4.0 WIFI Video Transport Module Specification:
- Executive standard: IEEE802.11b/g/n
- Power supply voltage: 5V±5%
- Memory: 32M
- FLASH :4M
- Interface: USB2.0, fast Ethernet port, serial port, I/O port, reset key
- RF input impedance: 50Ohm
- USB differential impedance: 90Ohm
- The crystal frequency: 25MHz
- Temperature: 0~80 deg C
- Storage temperature: -40~85deg C
- Frequency range: 2.402~2.48GHz
- Modulation mode: 802.11 g/n: OFDM
802.11b:CCK (11, 5.5Mbps), QPSK (2Mbps), BPSK (1Mbps)
- Output power: 802.11b: 17dBm - +1.5dBm (11Mbps)
802.11g: 13dBm 1.5dBm (54Mbps)
802.11n: HT20 13dBm 1.5dBm (MCS7 HT20)
HT40 12dBm 1.5dBm (MCS7 HT40)
- Receiving sensitivity:
802.11b: 11M is less than -76dBm
802.11g: 54M is less than -65dBm
802.11n:HT20 MCS7 is less than -64dBm
HT40 MCS7 is less than -61dBm

Robot-LinkV4.0 WIFI Video Transport Module Function:
- Acquisition of USB camera images, sent to the client through Mjpeg format.
- Network - serial port instruction forwarding.

Robot-LinkV4.0 WIFI Video Transport Module Application:
- WIFI video car robot
- Smart household
- Security monitoring

Robot-LinkV4.0 WIFI Video Transport Module Software:
Robot Link 4 AR9331, pre brush studio openwrt firmware, supporting video forwarding, data forwarding (two-way). Module is a server, open the TCP connection, port number is 2001, so when DIY program, you need to set the program for Client client mode, and then connect to the 2001 port module to send and receive data. Video port is 8080, Address to request video streams´╝Ü http://IP:8080/?action=stream
Default management address: 192.168.1.1
Default password: admin

Robot-LinkV4.0 WIFI Video Transport Module Use case:
- Match the camera to the module's USB interface.
- 5V voltage to the module for (if it is a mobile phone charger power supply, remember get the USB board jumper cap removed)
- WIFI module red light began to blink, 30 seconds later stop flashing.
- Open the client software, choose to open the video can be seen from the video camera,select the WIFI mode can send control commands.

Robot-LinkV4.0 WIFI Video Transport Module Package included:
- 1 x WIFI Video Transport Module
- 1 x Antenna

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

You may also be interested in the following product(s)