Welcome

Freaduino UNO Arduino UNO Rev3 compatible board

Item ID: FUNORV1.8

Be the first to review this product

Availability: In stock

$32.95

Availability: In stock

$32.95

Details

Freaduino UNO Arduino UNO Rev3 compatible board online for sale

Freaduino UNO Arduino UNO Rev3 compatible board online for sale


Freaduino UNO Arduino UNO Rev3 compatible board Description:

  • Freaduino UNO is an Arduino compatible board. It is based on Arduino UNO Rev3 design. So you can use Freaduino as Arduino UNO Rev3 . All code, shield and IDE for Arduino UNO Rev3 are also valid on Freaduino UNO. Some visible improvement on hardware make Freaduino UNO more flexible and easier to use. 
  • For example: 3.3v or 5v IO selectable allow you connect some 3.3v modules (such as XBee) to Freaduino directly. SPI, COM and IIC bus breakout make bus connect easier. 
  • The Arduino Uno Rev3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
  • It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
  • The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U2 programmed as a USB-to-serial converter."Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0.
  • The Uno and version 1.0 will be the reference versions of Arduno, moving forward. The Uno is the latest in a series of USB Arduino boards, and the reference model for the Arduino platform.
  • This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.
  • The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.
  • Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).

Buy best Freaduino UNO Arduino UNO Rev3 compatible board online for sale


What is Freaduino different from Arduino Duemilanove? 

Freaduino UNO different from Arduino UNO Rev3 duemilanove


Freaduino UNO Arduino UNO Rev3 compatible board Feature:

  1. Inherits all of Arduino Duemilanove's features.
  2. Compatible to Arduino UNO/Duemilanove’s pin layout, screw hole and dimensions.
  3. 3.3V or 5v Operating Voltage selecable.
  4. More visible location of Indicator LEDs.
  5. Wide range external input from 7~23V DC.
  6. UART/IIC and SPI interface breakout.
  7. Evolved with SMD components.
  8. Digital I/O pins 14 (of which 6 provide PWM output).
  9. Flash memory 32 KB of which 0.5 KB used by bootloader.
  10. SRAM 2 KB.
  11. EEPROM 1 KB.
  12. Clock speed 16 MHz.
  13. 68mm x 53mm.

Freaduino UNO Rev1.2 Arduino UNO Rev3 compatible board

Freaduino UNO

 

Freaduino UNO Arduino UNO Rev3 compatible board Application Ideas:

  1. Led display/LCD controller.
  2. Pulse width modulation driver.
  3. Robot controller.
  4. Data acquisition systems.
  5. Alarm systems.
  6. Programmable logic controllers.
  7. Embedded Webservers.
  8. Control Systems.

Brand new freaduino UNO Rev1.2 Arduino UNO Rev3 compatible board



Freaduino UNO Arduino UNO Rev3 compatible board Cautions:

  1. The Arduino Uno R3 requires the Arduino 1.0 drivers folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have Arduino 1.0 installed on that machine. If you are interested in reading more about the changes to the IDE, check out the official Arduino 1.0 Release notes!
  2. The Arduino reference design can use an Atmega8, 168, or 328, Current models use an ATmega328, but an Atmega8 is shown in the schematic for reference. The pin configuration is identical on all three processors.


Freaduino UNO Arduino UNO Rev3 compatible board Package List:

  • 1 x Freaduino UNO.
  • 1 x miniUSB cabLe.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Only registered users can write reviews. Please, log in or register